BROADCASTS.com

CNC Router Tips Podcast Episode 36

Straight As A Rail.
How To Align Linear Rails

CNC Router Tips Podcast looks at how to align your linear rails to make your CNC Router table more accurate. Also whe hear from the winner of the VCarve Desktop Software Giveaway, discuss makerspaces including a looked in on the Pumping Station One Makerspace in Chicago.

Q: HI Bill, My names Bryce Stoddart from Australia. My question is; Do you have any tips or tricks for aligning the rails in both directions and either side for a home-made CNC?

Bill Griggs contact info:
Twitter: @BillGriggs
Website: http://cncroutertips.com
SHOW NOTES: http://cncroutertips.com/36

Websites Mentioned
CNC ROUTER BIT STARTER SET http://cncroutertips.com/bits
Resources Page http://cncroutertips.com/resources
Demo Software http://cncroutertips.com/demo
VCarve Pro http://themakersguide.com/vcarve8
Prumping Station One Makerspace https://pumpingstationone.org/
Podcast Movement http://podcastmovement.com/
MSCdirect https://www.mscdirect.com
Mcmaster Carr http://www.mcmaster.com/
Amazon https://www.amazon.com/
Harbor Freight http://www.harborfreight.com/
Themakermap http://themakermap.com/
Urbana Makerspace https://makerspaceurbana.org/
Salt Makerspace http://saltmaker.org
SU Makerspace http://makerspace.syr.edu
Faro http://www.faro.com/products/metrology/faroarm-measuring-arm/overview

How to leave a review on iTunes
Go to this page.
https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2
Click View in iTunes.
Click on ratings and reviews in iTunes
Click the Write a Review button
Leave an honest rating.
Then write a review Just a few words.