Podcasts Technology 2013 Roma - IGF XXII
2013 Roma - IGF XXII

2013 Roma - IGF XXII

53 episodes

Main Topics: Analytical, computational and physical Models; Biomaterials and Wood Fracture and Fatigue; Biomechanics; Ceramics Fracture and Damage; Composites; Computational Mechanics; Concrete & Rocks; Creep Fracture; Damage Mechanics; Damage and fracture in materials under dynamic loading; Durability of structures; Environmentally Assisted Fracture; Failure Analysis and Case Studies; Fatigue - Crack Growth (all materials); Fatigue Resistance of metals; Fatigue of Metals – Very High Cycle; Failure Analysis and Forensic Engineering; Fractography and Advanced metallography; Fracture and Fatigue at Atomistic and Molecular Scales; Fracture and fatigue testing systems; Fracture under Mixed-Mode and Multiaxial Loading; Fracture vs. Gradient Mechanics; Functional Gradient Materials; Impact & Dynamics; Fundamentals of cohesive zone models; History of Fracture Mechanics and Fatigue; Innovative Alloys; Linear and Nonlinear Fracture Mechanics; Materials mechanical behavior and image analysis; Mesomechanics of Fracture; Micromechanisms of Fracture and Fatigue; Multi-physics and multi-scale modelling of cracking in heterogeneous materials; Multiscale Experiments and Modeling; Nanostructured Materials; Nondestructive Examination; Physical Aspects of Brittle Fracture; Physical Aspects of Ductile Fracture; Polymers Fracture and Fatigue; Probabilistic Fracture Mechanics; Reliability and Life Extension of Components; Repair and retrofitting: modelling and practical applications; Sandwiches, Joints and Coatings; Smart Materials; Structural Integrity; Temperature Effect; Thin Films

Podcasts

Identification of contact regimes in mechanical components for the ....

Published: July 10, 2013, 5:27 p.m.
Duration: 8 minutes 58 seconds

Listed in: Technology

Hot workability of aluminum particulate composites

Published: July 10, 2013, 5:26 p.m.
Duration: 13 minutes 36 seconds

Listed in: Technology

A numerical model to evaluate the effect of hydrogen embrittlement on low-alloy steels

Published: July 10, 2013, 5:26 p.m.
Duration: 18 minutes 21 seconds

Listed in: Technology

Weight function for corner crack nearby intersecting cylindrical holes

Published: July 10, 2013, 5:25 p.m.
Duration: 13 minutes 20 seconds

Listed in: Technology

Application of Digital Image Correlation for the effect of glass fibres on the strength ...

Published: July 10, 2013, 5:25 p.m.
Duration: 14 minutes 37 seconds

Listed in: Technology

Experimental method for the determination of the under-stress first-plasticization process parameters

Published: July 10, 2013, 5:24 p.m.
Duration: 19 minutes 24 seconds

Listed in: Technology

Influence of carbon nanotubes addition onto the mechanical properties of restoration mortars

Published: July 10, 2013, 5:23 p.m.
Duration: 17 minutes 10 seconds

Listed in: Technology

Full field displacement measurements of notched pseudoelastic specimens

Published: July 10, 2013, 5:17 p.m.
Duration: 14 minutes 56 seconds

Listed in: Technology

Effects of a lubricating aqueous gel on the operative life of Ni-Ti endodontic rotary instruments: preliminary investigation

Published: July 10, 2013, 5:16 p.m.
Duration: 17 minutes 49 seconds

Listed in: Technology

Fatigue endurance of new high-strength car-body steels

Published: July 10, 2013, 5:15 p.m.
Duration: 12 minutes 13 seconds

Listed in: Technology

Morphological characteristics of aluminium foams produced by replication casting

Published: July 10, 2013, 5:15 p.m.
Duration: 11 minutes 36 seconds

Listed in: Technology

Mechanical characterization of basalt fibre reinforced plastic with different fabric reinforcements ...

Published: July 10, 2013, 5:14 p.m.
Duration: 8 minutes 50 seconds

Listed in: Technology

Crack path in a Zn-Cu-Al PE alloy under uniaxial load

Published: July 10, 2013, 5:13 p.m.
Duration: 14 minutes 19 seconds

Listed in: Technology

Very high-cycle fatigue resistance of shot peened high-strength aluminium alloys

Published: July 10, 2013, 5:12 p.m.
Duration: 13 minutes 41 seconds

Listed in: Technology

Failure investigation on a helicopter main rotor actuator attachment

Published: July 10, 2013, 5:12 p.m.
Duration: 16 minutes 29 seconds

Listed in: Technology

Thermomechanical behaviour of alumina-mullite refractories developed by recycling industrial ceramic wastes

Published: July 10, 2013, 5:11 p.m.
Duration: 12 minutes 49 seconds

Listed in: Technology

Modeling of smart concrete beams with Shape Memory Alloy actuators

Published: July 10, 2013, 5:11 p.m.
Duration: 12 minutes 32 seconds

Listed in: Technology

Numerical-experimental analysis for residual stress determination in a welded joint

Published: July 10, 2013, 5:10 p.m.
Duration: 12 minutes 22 seconds

Listed in: Technology

Experimental measure and model validation of COD of cracked pipes under bending

Published: July 10, 2013, 5:10 p.m.
Duration: 9 minutes 21 seconds

Listed in: Technology

Simulation of fatigue debonding in adhesively bonded three-dimensional joint geometries using a cohesive zone model approach

Published: July 10, 2013, 5:09 p.m.
Duration: 15 minutes 22 seconds

Listed in: Technology

Finite element implementations for gradient elasticity

Published: July 10, 2013, 5:09 p.m.
Duration: 28 minutes 39 seconds

Listed in: Technology

Fracture mechanics parameters evaluation using the digital image correlation technique: a first approach

Published: July 10, 2013, 5:09 p.m.
Duration: 11 minutes 46 seconds

Listed in: Technology

On the fatigue assessment of plain and short fibre/particle reinforced concretes

Published: July 10, 2013, 5:08 p.m.
Duration: 15 minutes 47 seconds

Listed in: Technology

Martensitic phase transformation of Cu-Zn-Al alloy, induced by cold rolling deformation

Published: July 10, 2013, 5:08 p.m.
Duration: 11 minutes 30 seconds

Listed in: Technology

Experimental determination of compressive strength of an unidirectional composite lamina: indirect estimate ...

Published: July 10, 2013, 5:07 p.m.
Duration: 11 minutes 52 seconds

Listed in: Technology

Meccanica della frattura ed effetti di scala: ragioni semplici per fenomeni complessi

Published: July 10, 2013, 5:03 p.m.
Duration: 34 minutes 40 seconds

Listed in: Technology

Strength and fracture of TWIP steel dissimilar weld joints

Published: July 10, 2013, 5:03 p.m.
Duration: 15 minutes 58 seconds

Listed in: Technology

Realization of a bone-inspired composite by means of a biomimetic approach

Published: July 10, 2013, 5:02 p.m.
Duration: 11 minutes 57 seconds

Listed in: Technology

Fatigue crack micromechanisms on a PE Zn-Cu-Al alloy

Published: July 10, 2013, 1:13 p.m.
Duration: 12 minutes 12 seconds

Listed in: Technology

Shakedown in brittle-matrix fiber-reinforced cracked composite beams

Published: July 10, 2013, 1:03 p.m.
Duration: 13 minutes 43 seconds

Listed in: Technology

Fatigue damage evaluation of martensitic stainless steel by means of thermal methods

Published: July 10, 2013, 1:02 p.m.
Duration: 13 minutes 57 seconds

Listed in: Technology

Fracture behaviour of cast TiAl based intermetallic alloys

Published: July 10, 2013, 12:52 p.m.
Duration: 12 minutes 7 seconds

Listed in: Technology

Effect of isothermal heat treatments on Duplex Stainless Steels impact toughness

Published: July 10, 2013, 12:51 p.m.
Duration: 13 minutes 5 seconds

Listed in: Technology

Measurement of ductile fracture evolution in sheet metal forming

Published: July 10, 2013, 12:50 p.m.
Duration: 13 minutes 34 seconds

Listed in: Technology

Fretting damage parameters in splined couplings

Published: July 10, 2013, 12:30 p.m.
Duration: 10 minutes 18 seconds

Listed in: Technology

Damage investigation of Zn-Al alloy coatings on steel wires

Published: July 10, 2013, 12:29 p.m.
Duration: 9 minutes 48 seconds

Listed in: Technology

Dog-bone versus Gaussian gigacycle fatigue specimens for size effect evaluation

Published: July 10, 2013, 12:28 p.m.
Duration: 12 minutes 46 seconds

Listed in: Technology

Integrity and durability of photovoltaic modules: an overview of mechanical failure modes

Published: July 10, 2013, 12:28 p.m.
Duration: 9 minutes 43 seconds

Listed in: Technology

Graphite nodule morphology evolution as an indicator of DCI macroscopic damage level

Published: July 10, 2013, 12:27 p.m.
Duration: 11 minutes 14 seconds

Listed in: Technology

Analysis of stress triaxiality influence: ferritic DCI damaging micromechanisms

Published: July 10, 2013, 12:27 p.m.
Duration: 12 minutes 35 seconds

Listed in: Technology

FEM-DBEM coupled procedure for assessment of cracks in lateral supports of ...

Published: July 10, 2013, 12:13 p.m.
Duration: 16 minutes 47 seconds

Listed in: Technology

The specific heat loss combined with the thermoelastic effect for an experimental analysis of the ...

Published: July 10, 2013, 12:06 p.m.
Duration: 15 minutes 28 seconds

Listed in: Technology

Mixed mode fatigue crack growth in railway axles

Published: July 10, 2013, 12:06 p.m.
Duration: 17 minutes 17 seconds

Listed in: Technology

Toughening of silicon carbide-based materials

Published: July 10, 2013, 7:58 a.m.
Duration: 13 minutes 25 seconds

Listed in: Technology

Microstructure and mechanical characterization of HVOF CoCrAlTa base coatings ...

Published: July 10, 2013, 7:56 a.m.
Duration: 19 minutes 39 seconds

Listed in: Technology

A potential-based particle method for failure modeling in solids

Published: July 10, 2013, 7:55 a.m.
Duration: 15 minutes 19 seconds

Listed in: Technology

Interpolation Model of Fatigue Crack Propagation Data

Published: July 10, 2013, 7:53 a.m.
Duration: 13 minutes 43 seconds

Listed in: Technology

Creep crack initiation and growth in 12%Cr-steel turbine disks

Published: July 10, 2013, 7:49 a.m.
Duration: 16 minutes 55 seconds

Listed in: Technology

Practical Applications of Fracture Mechanics in Failure Analysis

Published: July 10, 2013, 7:47 a.m.
Duration: 24 minutes 26 seconds

Listed in: Technology

Analisi di danneggiamenti complessi: approccio integrato tra frattografia ...

Published: July 10, 2013, 7:42 a.m.
Duration: 10 minutes 9 seconds

Listed in: Technology

Fracture behaviour of grain refined A356 cast aluminium alloy: tensile ...

Published: July 10, 2013, 7:34 a.m.
Duration: 14 minutes 34 seconds

Listed in: Technology

Adhesion strength of adhesive bonded NiTi thin metal sheets

Published: July 10, 2013, 7:33 a.m.
Duration: 12 minutes 30 seconds

Listed in: Technology

Application of the Virtual Fields Method to fracture mechanics

Published: July 10, 2013, 7:32 a.m.
Duration: 10 minutes 14 seconds

Listed in: Technology