Podcasts Technology 2015, IGFXXIII, Favignana
2015, IGFXXIII, Favignana

2015, IGFXXIII, Favignana

61 episodes


Podcasts

Evaluation of the relative plastic work factor during the fatigue test

Published: June 29, 2015, 8:04 a.m.
Duration: 13 minutes 51 seconds

Listed in: Technology

Improvement of fatigue resistance of a tool steel by surface treatments

Published: June 29, 2015, 8:01 a.m.
Duration: 11 minutes 13 seconds

Listed in: Technology

Experimental study of the crack growth in stainless steels using thermal methods

Published: June 29, 2015, 8:01 a.m.
Duration: 11 minutes 14 seconds

Listed in: Technology

Effects of higher order terms in fracture mechanics of shape memory alloys by digital image correlation

Published: June 29, 2015, 8 a.m.
Duration: 12 minutes 50 seconds

Listed in: Technology

Densification of high thickness C C composites by Chemical Vapor Infiltration

Published: June 29, 2015, 8 a.m.
Duration: 10 minutes 48 seconds

Listed in: Technology

A FE-Meshless multiscale approach for masonry materials

Published: June 29, 2015, 7:54 a.m.
Duration: 12 minutes 21 seconds

Listed in: Technology

A numerical failure analysis of multi-bolted joints in FRP laminates based on basalt fibers

Published: June 29, 2015, 7:53 a.m.
Duration: 16 minutes 20 seconds

Listed in: Technology

The displacement field in a finite circular disc with a central rectangular slit

Published: June 29, 2015, 7:53 a.m.
Duration: 16 minutes 17 seconds

Listed in: Technology

An evaluation of size effect in CTOD-SENB fracture toughness tests

Published: June 29, 2015, 7:52 a.m.
Duration: 12 minutes 39 seconds

Listed in: Technology

A first approach to the experimental study of fracture parameters in opening and mixed mode by caustics

Published: June 29, 2015, 7:51 a.m.
Duration: 12 minutes 12 seconds

Listed in: Technology

Characterization of welded joints MIG and SAW on LDX 2101 Duplex SS

Published: June 29, 2015, 7:49 a.m.
Duration: 9 minutes 25 seconds

Listed in: Technology

Mechanical behaviour of a green sandwich made of flax reinforced polymer facings and cork core

Published: June 29, 2015, 7:45 a.m.
Duration: 15 minutes 11 seconds

Listed in: Technology

Toughness evaluation of LARES satellite tungsten alloy

Published: June 29, 2015, 7:44 a.m.
Duration: 12 minutes 3 seconds

Listed in: Technology

Wear behavior of Zn-15Al-1Cu-Mg alloy after aging

Published: June 29, 2015, 7:44 a.m.
Duration: 9 minutes 44 seconds

Listed in: Technology

Thermal stress analysis of different full and ventilated disk brakes

Published: June 29, 2015, 7:44 a.m.
Duration: 8 minutes 27 seconds

Listed in: Technology

Principal component analysis for characterization of fretting wear experiments on spline couplings

Published: June 29, 2015, 7:41 a.m.
Duration: 17 minutes 39 seconds

Listed in: Technology

Natural time analysis of acoustic emissions in Double Edge Notched Tension (DENT) marble specimens

Published: June 29, 2015, 7:41 a.m.
Duration: 13 minutes 37 seconds

Listed in: Technology

Manufacturing and characterization of AlSi foams as core materials

Published: June 29, 2015, 7:41 a.m.
Duration: 12 minutes 37 seconds

Listed in: Technology

Modeling the electromechanical impedance method for the prediction of the biomechanical behavior of dental implant stability

Published: June 29, 2015, 7:41 a.m.
Duration: 12 minutes 44 seconds

Listed in: Technology

Size effect in crack spacing of quasi-brittle materials

Published: June 29, 2015, 7:41 a.m.
Duration: 9 minutes 43 seconds

Listed in: Technology

Improving adhesion and macroscopic energy dissipation in adhesive joints using pulsed laser surface pre-treatments

Published: June 29, 2015, 7:37 a.m.
Duration: 14 minutes 30 seconds

Listed in: Technology

Interface Fracture and Delamination Failure of Composites – Statistical Analysis

Published: June 29, 2015, 7:36 a.m.
Duration: 28 minutes 3 seconds

Listed in: Technology

Fragmentation of corrosion protection coatings a combined finite-element discrete-element study

Published: June 29, 2015, 7:35 a.m.
Duration: 12 minutes 11 seconds

Listed in: Technology

Hydrogen Embrittlement and Fatigue Fracture of a crankshaft of an internal combustion engine

Published: June 29, 2015, 7:35 a.m.
Duration: 13 minutes 45 seconds

Listed in: Technology

Innovative experimental techniques in the service of restoration of stone monuments - Part I & II

Published: June 29, 2015, 7:34 a.m.
Duration: 14 minutes

Listed in: Technology

Full field strain measurement of dissimilar laser welded joints

Published: June 29, 2015, 7:34 a.m.
Duration: 14 minutes 36 seconds

Listed in: Technology

Finite element modelling of the progressive damage and failure of thermoplastic polymers in puncture impact

Published: June 29, 2015, 7:34 a.m.
Duration: 11 minutes 47 seconds

Listed in: Technology

Analytical modelling of the pullout behaviour of synthetic fibers treated with nano-silica

Published: June 29, 2015, 7:25 a.m.
Duration: 16 minutes 1 second

Listed in: Technology

Fatigue crack propagation in a ferritic-pearlitic DCI overload effects on damaging mechanisms

Published: June 29, 2015, 7:24 a.m.
Duration: 12 minutes 12 seconds

Listed in: Technology

Experimental investigation on temperature dependent crack tip phase transformations in NiTi alloys

Published: June 29, 2015, 7:24 a.m.
Duration: 13 minutes 47 seconds

Listed in: Technology

Experimental determination of compressive residual strength of a carbon epoxy laminate after a near-edge impact

Published: June 29, 2015, 7:23 a.m.
Duration: 8 minutes 50 seconds

Listed in: Technology

Crack growth monitoring in stainless steels by means of TSA technique

Published: June 29, 2015, 7:23 a.m.
Duration: 11 minutes 30 seconds

Listed in: Technology

Crack growth behavior of welded stiffened panel

Published: June 29, 2015, 7:23 a.m.
Duration: 11 minutes 53 seconds

Listed in: Technology

Characterization of a new aluminium alloy for the production of wheels by Hybrid Aluminium Forging

Published: June 29, 2015, 7:22 a.m.
Duration: 10 minutes

Listed in: Technology

Notch sensitivity on fully reversed axial fatigue behaviour of different polypropylene compounds

Published: June 29, 2015, 7:08 a.m.
Duration: 14 minutes 34 seconds

Listed in: Technology

The use of Nanoindentation technique for fracture and long term creep analysis for materials

Published: June 29, 2015, 7:08 a.m.
Duration: 8 minutes 3 seconds

Listed in: Technology

VHCF response of AISI H13 steel assessment of size effects through Gaussian specimens

Published: June 29, 2015, 7:08 a.m.
Duration: 21 minutes 42 seconds

Listed in: Technology

TFA-based homogenization for composites subjected to coupled damage-friction effects

Published: June 29, 2015, 7:06 a.m.
Duration: 15 minutes 49 seconds

Listed in: Technology

On the auxetic behaviour of metamaterials with re-entrant cell structures

Published: June 29, 2015, 7:06 a.m.
Duration: 18 minutes 37 seconds

Listed in: Technology

Stress transfer within CNT fibres a FEA approach

Published: June 29, 2015, 7:06 a.m.
Duration: 11 minutes 20 seconds

Listed in: Technology

Pipeline corrosion failure in an absorption chiller

Published: June 29, 2015, 7:05 a.m.
Duration: 14 minutes 16 seconds

Listed in: Technology

Numerical evaluation and experimental comparison of elasto-plastic stress-strain distribution around the corner cracks of a notc

Published: June 29, 2015, 7:04 a.m.
Duration: 14 minutes 13 seconds

Listed in: Technology

Numerical modeling of aluminum alloys fracture for automotive applications

Published: June 29, 2015, 7:03 a.m.
Duration: 10 minutes 3 seconds

Listed in: Technology

Mechanical strength and fracture of resistance spot welded advanced high strength steels

Published: June 29, 2015, 7:01 a.m.
Duration: 16 minutes 41 seconds

Listed in: Technology

Nondestructive examination of hardened concrete using solitary waves

Published: June 29, 2015, 6:59 a.m.
Duration: 12 minutes 42 seconds

Listed in: Technology

Mortar made of recycled sand from C&D

Published: June 29, 2015, 6:58 a.m.
Duration: 13 minutes 41 seconds

Listed in: Technology

Mechanical and structural characterization of Zn-Ti colored coatings

Published: June 29, 2015, 6:58 a.m.
Duration: 11 minutes 55 seconds

Listed in: Technology

Mechanical behavior of aluminum sandwiches made by laser welding

Published: June 29, 2015, 6:58 a.m.
Duration: 12 minutes 52 seconds

Listed in: Technology

Mixed mode delamination analysis by a thermodynamically consistent cohesive interface model with independent mode I and mode II

Published: June 29, 2015, 6:57 a.m.
Duration: 11 minutes 46 seconds

Listed in: Technology

Experimental and numerical investigation on shear propagation of subsurface cracks under rolling contact fatigue

Published: June 29, 2015, 6:50 a.m.
Duration: 16 minutes

Listed in: Technology

Dynamic effects of wind loads on a gravity damper

Published: June 29, 2015, 6:48 a.m.
Duration: 11 minutes 45 seconds

Listed in: Technology

Fatigue assessment by thermal analysis during tensile tests on steels

Published: June 29, 2015, 6:48 a.m.
Duration: 8 minutes 47 seconds

Listed in: Technology

Fracture toughness of hydrothermally aged epoxy systems

Published: June 29, 2015, 6:47 a.m.
Duration: 15 minutes 6 seconds

Listed in: Technology

Fatigue behavior of shot peened notched specimens effect of the residual stress field ahead of the notch root

Published: June 29, 2015, 6:46 a.m.
Duration: 16 minutes 27 seconds

Listed in: Technology

Graphite nodules influence on DCIs mechanical properties experimental and numerical investigations

Published: June 29, 2015, 6:46 a.m.
Duration: 13 minutes 16 seconds

Listed in: Technology

Considerations on acoustic emissions in Ti Grade 5 during fatigue test

Published: June 29, 2015, 6:42 a.m.
Duration: 15 minutes 1 second

Listed in: Technology

Analysis of fatigue damage in shape memory alloys by instrumented indentation

Published: June 29, 2015, 6:42 a.m.
Duration: 15 minutes 45 seconds

Listed in: Technology

Brittle materials and stress concentrations are they able to withstand

Published: June 29, 2015, 6:42 a.m.
Duration: 15 minutes 5 seconds

Listed in: Technology

Debonding process of masonry element strengthened with FRP

Published: June 29, 2015, 6:42 a.m.
Duration: 13 minutes 33 seconds

Listed in: Technology

An investigation on the fatigue based delamination of woven carbon-epoxy composite laminates reinforced with polyamide nanofiber

Published: June 29, 2015, 6:40 a.m.
Duration: 14 minutes 11 seconds

Listed in: Technology

2D size and shape definition of defects by B-scan image analysis

Published: June 29, 2015, 6:37 a.m.
Duration: 14 minutes 16 seconds

Listed in: Technology